|
|
|
|
|
| |
|
|
> Home > Online Catalog > Topcoats
|
Metal Mask
|
| |
|
Quantity in Basket:
None
|
| |
|
Metal Mask is a single component polyurethane coating
that makes any metal surface look exactly like new bare
metal.
|
Metal Mask is non-porous and will not crack, chip, or peel when properly applied. It has great scratch and abrasion resistance and its not sensitive to UV light. Follow the directions carefully and you will be rewarded with the finest protective coating for metal available anywhere!
Application:
Wash the part to be painted with Marine Clean to remove grease, wax, oil, or silicone. Apply Metal Ready to etch the surface. If it is a new part, Metal Mask can be applied directly to the surface. If it is an old rusted part, we
suggest using POR-15 Rust Preventive paint first, then applying Metal Mask as a top coat. This will insure the best protection possible.
Uses; undercarriage components, gas tanks, steering components, hood latches, hinges, and springs.
Half Pint covers @ 25 sq. ft. Pint covers @ 50 sq. ft. Quart covers @ 96 sq. ft.
Half of this joint arm was painted with
Metal Mask to show how closely it
matches the appearance of bare metal
|
|
Make sure you've got all the supplies you'll need for using POR-15 rust preventive coatings and read our FAQ and Product Information areas.
|
|
POR-15 Rust Preventive Coatings
For the best protection, first apply our POR-15 Rust Preventive Coating - a paint-like substance which acts as a total rust inhibitor and is also very effective as a metal filler.
|
|
POR-15 Solvent
Use only POR-15 Solvent for thinning POR-15 ® rust preventive coatings and top coats. |
|
Paint Brushes
Our throw-away-priced brushes will hold more paint and spread more smoothly than more expensive brushes. |
|
Paint Spouts
Flexible Paint Spouts eliminate messy drips and keep grooves clean for resealing cans. Order enough for all your paint cans. |
|
Latex Gloves
Our Latex Gloves are thin, close-fitting, and have the dexterity and protection of fine surgical gloves. These are a must when using POR-15. |
|
POR-15 top coats are actually strengthened by exposure to moisture. They won't crack, chip, peel, or yellow, and are flexible as well. |
|
| |
|
|
